One-piece fireproof suit

I-Connected multi-functional protective clothing

1.Overall thermal protection performance TPP value: ≥35cal/cm².
2. Flame retardant performance: the length of damage ≤ 100mm; renewed combustion time ≤ 2S; no melting, dripping phenomenon.
3. Rupture strength: warp and weft ≥1000N.
4. Seam breaking strength: ≥650N.
5. Tearing strength: warp and weft ≥100N.
6. Thermal stability: 260ºC,5min, shrinkage ≤10%, no obvious change on the surface.
7. Hydrostatic pressure resistance: ≥60kpa.
8. Colour fastness: wash staining and water friction resistance ≥ 3.
9. Surface moisture resistance: water level ≥ 3.
10. moisture permeability performance: moisture permeability ≥5000g (m²-24h).
11. Shrinkage rate: ≤5%.
12. Oil repellency: ≥3.
13. Total mass of protective clothing: ≤4.5kg.

II-Firefighting helmet
1. Moulded with flame retardant material.
2. High temperature resistance, impact resistance.
3. Safe and comfortable to wear, protect the head and neck of the wearer.

III-Protective gloves
1. The outer layer is made of 100% aramid fabric, and the palm part is made of high-strength cloth which is wear-resistant and anti-slip.
2. Flame retardant performance of the outer layer: the length of damage ≤ 100mm; the duration of combustion ≤ 2S; no melting and dripping phenomenon.
3. Palm wear resistance: ≥2000.
4. The gloves are designed in accordance with the principle of ergonomics, each finger has four faces sewn together, so that the gloves are close to the four fingers, and the movement is flexible and free. The back of the hand and the four fingers are added with anti-collision strips, so that the wearer can get buffer and play a protective role when he/she is impacted in the operation.

IV-Flame retardant headgear
1. 100% aramid knitted fabric is used, with high elasticity and comfortable to wear.
2. Flame retardant performance: length of damage ≤ 100mm; renewal time ≤ 2S; no melting, dripping phenomenon.
3. Thermal stability: ≤10%, no obvious change on the surface.

V-4.5 Fire-fighting belt
1. The belt consists of webbing, inner belt buckle, outer belt buckle, ring buckle and two pull ring and other parts.
2. The belt is designed for a load of 1.33 kN.
3. Corrosion resistance of metal parts: slight grade.

VI-firefighter fire-fighting protective boots
1. The overall design of the protective boots is user-friendly, with lifting handles on both sides of the mouth of the shoe for easy putting on/taking off and picking up, and rubber reinforcement on the body of the shoe for enhanced protection of the shin bone.
4.6.2 Stainless steel plate design on the sole and steel clad protection on the toe of the boots, with anti-smash and anti-puncture function.